Strut Fittings & Accessories

9-5/32 in 3 2-1/8 in 2 4 in 2 5-13/32 in 2 7 in 2 7-1/4 in 2 1-3/8 in 1 136.525 mm 1 25-1/2 in 1 3-3/4 in 1 40 mm 1 5-7/8 in 1 7-1/16 in 1 7-1/8 in 1 88.9 mm 1

Retaining 4 Surface Raceway & Lighting Systems (Series 800) 4 Corrosion-Resistant 3 Fittings & Brackets (Series 200) 3 Beam Clamps (Series 500) 2 Diagonal 2 Strut Seismic Hinge 2 Surface Raceway and Lighting Systems 2 Trap-Eze Connector 2 Triple 2 Washer, U Shape 2 90°, Retaining 1 Angled 1 Beam Clamp 1 CADDY PYRAMID ST Fixed Strut Support 1 Clamping Bracket 1 Compression 1 Continuous Threaded 1 Diagonal, Corrosion-Resistant 1 Double Diagonal 1 Double Handle 1 Flat Back, Split Ring 1 Flat Plate Fittings 1 Internal 1 Left 1 Left Hand, Corner 1 Left Handed 1 Pipe Straps, Pipe Clamps & Hangers (Series 700) 1 Quick Clip 1 Right 1 Right Handed 1 Rigid, One-Piece 1 Split Ring 1 Twist Clip with Wing Nut 1 Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately 1 Wing Shape Fittings 1 Z-Shape Fittings 1

Calbrite Stainless Steel Conduit 1

Malleable Iron,Steel 1 Malleable Iron/Steel 1 Maple 1 Metal 1 Mild Steel 1 Nylon/Polyamide 1 Plastic 1 Polyethylene Foam/16 ga Steel 1 Steel,Steel 1

Strut Rod 2 45° Angle Fitting 1 90° Angle 1 End Cap Set 1 Open Angle Fitting 1 Channel Bracket 20 Wing Shape Fitting 14 End Cap 9 Splice Plate 7 Corner Plate 6 Strut Fastener 6 Angle Bracket 5 Flat Plate Bracket 5 Square Washer 5 U-Shape Support 5 Wall Ladder Bracket 4 Z-Shape Support 4 Bracket Wing 3 Wing Bracket 3 Angle Bracket with Magnet 2 Angular Fitting 2 Channel Nut 2 Channel Stud Nut 2 Closure Strip 2 Coupling Rod 2 Cross Plate 2 Flat Bracket 2 Flat Plate Corner Bracket 2 Knee Brace 2 Mounting Plate 2 Safety End Cap 2 Standard Rod Coupling 2 Support Bracket 2 Support Fitting 2 Trolley 2 U-Shape Fitting 2 U-Shape Washer 2 U-Support 2 Z-Shape Fitting 2 Angle 1 Brace 1 Ceiling Flange 1 Channel Angle Bracket with Flange 1 Channel Cover 1 Conduit Connector 1 Corner Bracket 1 Corner Fitting 1 Corner Plate with Magnet 1 Coupling Nut 1 Cross Flat Fitting 1 Diagonal Post Base 1 End Cap with knockout 1 End Fitting 1 Fiber Retainer 1 Flange 1 Flat Corner Fitting 1 Flat Plate 1 Flat Swivel Plate 1 Internal Joiner 1 Joiner with Reinforcing Plate 1 Long Spring Nut 1 Mounting Bracket 1 Retainer Bracket 1 Right Wing Shape Fitting 1 Rooftop Pipe Support 1 Sealed Fitting 1 Short Angle Bracket 1 Splice Bracket 1 Spot Insert Kit 1 Strut End Cap 1 Strut Seismic Hinge 1 Support 1 Swivel Plate 1 Tee Plate with Magnet 1 Threaded Hanger Rod 1 Track Support 1 Trap-Eze Connector 1 Triple Wing Shape Fitting 1 Twist Clip with Wing Nut 1 U-Shape Splice Support 1 Winged Corner Fitting 1 Winged Fitting 1

Silver Galvanized 2 Electro-Galvanized 1 Electrogalvanized 1 Gold 1 Gold Galvanized/Electro Galvanized 1 Gold Galvanized/Standard 1 GoldGalv 1 GoldGalv/Continuously Galvanized 1 Silver Electro Galvanized 1 Silver-Galvanized 1 Urethane Powder Coated 1

19-3/4 in 1 4-1/4 in 1 5-7/8 in 1

1-5/8 in 1 1/4 Inch x 3/8 Inch 1 3 in 1 3/4 in 1 450 lb 1 5/16 Inch 1 6 in H 1

8 in W x 4-3/8 in H 1