Strut & accessories

Malleable Iron,Steel 1 Malleable Iron/Steel 1 Maple 1 Metal 1 Mild Steel 1 Nylon/Polyamide 1 Plastic 1 Polyethylene Foam/16 ga Steel 1 Steel,Steel 1

Calbrite Stainless Steel Conduit 2 SPRING STEEL FA 2 OCAL CONDUIT FT 1

Square Washer 5 Coupling Rod 2 D-Channel 2 Cross Flat Fitting 1 Angle Fitting 10 Splice Plate 7 Corner Plate 6 Strut Fastener 6 Wing Fitting 6 Angle Bracket 5 Flat Plate Bracket 5 Tee Plate 5 U-Shape Support 5 Channel Support Bracket 4 Mounting Angle Bracket 4 Wall Ladder Bracket 4 Z-Shape Support 4 90° Corner Angle 3 Angle 3 Bracket Wing 3 Channel without Connector 3 Conduit To Deck Angle Bracket 3 Cross Plate 3 Knee Brace 3 Wing Bracket 3 Angle Bracket with Magnet 2 Angular Fitting 2 Channel Nut 2 Channel Stud Nut 2 Closure Strip 2 Corner Angle 2 Flat Bracket 2 Flat Plate Corner Bracket 2 Metal Channel without Connector 2 Mounting Plate 2 Right Angle Channel 2 Safety End Cap 2 Standard Rod Coupling 2 Strut Rod 2 Support Bracket 2 Support Fitting 2 Trolley 2 U-Shape Fitting 2 U-Shape Washer 2 U-Support 2 Z-Shape Fitting 2 45° Angle Fitting 1 90° Angle Channel 1 Back to Back Channel 1 Brace 1 Ceiling Flange 1 Channel Angle Bracket with Flange 1 Channel Cover 1 Conduit Connector 1 Corner Bracket 1 Corner Fitting 1 Corner Plate with Magnet 1 Coupling Nut 1 Diagonal Post Base 1 End Cap Set 1 End Cap with knockout 1 End Fitting 1 Fiber Retainer 1 Flange 1 Flat Corner Fitting 1 Flat Plate 1 Flat Swivel Plate 1 Internal Joiner 1 Joiner with Reinforcing Plate 1 Long Spring Nut 1 Mounting Bracket 1 Open Angle Fitting 1 Retainer Bracket 1 Right Angle Gusset Plate 1 Right Wing Shape Fitting 1 Rooftop Pipe Support 1 Sealed Fitting 1 Shallow Channel 1 Short Angle Bracket 1 Splice Bracket 1 Spot Insert Kit 1 Strut Seismic Hinge 1 Support 1 Swivel Plate 1 Tee Plate with Magnet 1 Telescoping Strut Replacement 1 Threaded Hanger Rod 1 Track Support 1 Trap-Eze Connector 1 Triple Wing Shape Fitting 1 Twist Clip with Wing Nut 1 U-Shape Splice Support 1 Winged Corner Fitting 1 Winged Fitting 1

Fittings, Brackets & Hardware 18 90° 13 Surface Raceway & Lighting Systems (Series 800) 5 Channels and Concrete Inserts 4 Flat 4 Retaining 4 Back to Back 3 Corrosion-Resistant 3 Fittings & Brackets (Series 200) 3 Horizontal/Vertical 3 Slotted 3 90°, Long Bushed 2 Angular Fittings 2 Back to Side 2 Beam Clamps (Series 500) 2 Diagonal 2 Left 2 Right 2 Side-Side 2 Simple Profile, Low Profile 2 Simple Profile, U-Profile 2 Standard Punched 2 Strut Seismic Hinge 2 Surface Raceway and Lighting Systems 2 Trap-Eze Connector 2 Triple 2 U-Profile 2 Washer, U Shape 2 1-2 Hole Corner Angle Bracket 1 90°, Retaining 1 Angled 1 Back Perforated, Simple U-Profile 1 Beam Clamp 1 Bracket, Corrosion-Resistance 1 CADDY PYRAMID ST Fixed Strut Support 1 Clamping Bracket 1 Compression 1 Continuous Threaded 1 Diagonal, Corrosion-Resistant 1 Double Diagonal 1 Double Handle 1 Extra Heavy Duty, Slotted 1 Flat Back, Split Ring 1 Flat Plate Fittings 1 Half Slot, Back to Back 1 Internal 1 Left Hand, Corner 1 Left Handed 1 Metal Framing 1 Opposite Side to Side 1 Pipe Straps, Pipe Clamps & Hangers (Series 700) 1 Punched 1 Quick Clip 1 Right Handed 1 Rigid, One-Piece 1 Riveted Back-to-Back 1 Round, Fully Adjustable 1 Shallow Channel 1 Simple Profile, C-Profile, Half Slot 1 Simple Profile, U-Profile, Half-Slotted 1 Simple U-Profile, Solid 1 Single Handle 1 Slotted, Structure 1 Split Ring 1 Twist Clip with Wing Nut 1 Type A 1 Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately 1 Wing Shape Fittings 1 Z-Shape Fittings 1

9 1

2-1/4 in 3 25.4 mm 3 1-7/8 in 2 6 mm 2 0.45 in 1 1-3/8 in 1 133.4 mm 1 2 in 1 2-3/8 in 1 3-1/8 in 1 3-7/8 in 1 40 mm 1 41.275 mm 1

9-5/32 in 3 2-1/8 in 2 3 in 2 3-3/4 in 2 4 in 2 5-13/32 in 2 7 in 2 7-1/4 in 2 1-3/8 in 1 136.525 mm 1 25-1/2 in 1 4-1/8 in 1 40 mm 1 5-25/64 in 1 5-7/8 in 1 7-1/16 in 1 7-1/8 in 1 88.9 mm 1

Electrogalvanized 2 Gold-Galvanized 2 GoldGalv/Standard 2 SilverGalv 2 Electro-Galvanized 1 Gold Galvanized/Electro Galvanized 1 Gold Galvanized/Standard 1 Gold Plated 1 GoldGalv 1 GoldGalv/Continuously Galvanized 1 Hot-Dip Galvanize 1 Hot-Dip Galvanized 1 Silver Electro Galvanized 1 Silver-Galvanized 1 Urethane Powder Coated 1

1/8 in 1 16 ga 1 2.66 mm 1 6 mm 1

19-3/4 in 1 2-1/2 in 1 2-5/10 in 1 4-1/4 in 1 5-25/64 in 1 5-7/8 in 1 5.375 in 1

1-5/8 in 1 1/4 Inch x 3/8 Inch 1 3 in 1 3/4 in 1 450 lb 1 5/16 Inch 1 6 in H 1

8 in W x 4-3/8 in H 1