Small crimp & wire connectors

NVENT THERMAL 21 PANDUIT 55 RACK-A-TIERS 5 SPECIAL MINE SERVICES 5 TYCO ELECTRONICS 2

Sta-Kon 10 Raychem 8 BLACKBURN 6 Spec-Kon 5 ILSCO 4 Legrand 4 Special Mine Services 4 SPEC-KON 3 Scotchlok™ 3 LAPP USA 2 Leviton 2 Rack-A-Tiers 2 3M™ 1 Blackburn 1 Color-Keyed 1 Hubbell 1 LAPP 1 Lapp 1 Midwest Electric 1 TE Connectivity 1 nVent CADDY 1 nVent Hoffman 1

Wire Connector 6 2-Port, 2-Wire, 102 Model, Standard Version 3 Wing 3 Bi-Metal, Short Sleeve 2 Flame Retardant 2 Wide Range/Ergonomic, Compact Design, Winged 2 Insulated 83 Locking, Short Sleeve 59 Non-Insulated Ring Terminal 36 Polypropylene Insulated Ferrule 35 Fully Insulated 31 Non-Insulated 29 Aluminum Pin Terminal 28 Non-Insulated Ferrule 24 Nylon Insulated Ring Terminal 24 Rectangular 24 Standard 23 Large 20 Insulated, Short Sleeve 18 Non-Insulated Flag Terminal 16 Motor Lead Female Disconnect 14 Ring Terminal 14 Fluoropolymer Insulated Ring Terminal 13 Non-Insulated Female Disconnect 13 Nylon Insulated Fork Terminal 13 Vinyl Insulated Male Disconnect 13 Motor Lead Male Disconnect 12 90°, Non-Insulated 11 Expanded 11 Polypropylene Insulated Twin Ferrule 11 Twist-On 11 Vinyl Insulated Ring Terminal 10 Flanged Tongue, Short Sleeve 9 Heat Shrinkable, Locking 9 Non-Insulated Heavy-Duty Ring Terminal 9 Non-Insulated, Short Sleeve 9 One Load 9 Partially Insulated 9 Single Key Access 9 Bimetallic 8 Non-Insulated, Rectangular 8 Non-Insulated, Locking, Short Sleeve 7 Non-Insulated, Sleeve 7 Piggyback, Partially Insulated 7 Vinyl Insulated Locking Fork Terminal 7 Wire Joint 7 Expanded, Locking 6 Flat 6 Long Sleeve, Heat Shrink 6 Vinyl Insulated Fork Terminal 6 CPM:AL/CU PIN 5 Insulated, Locking 5 Motor Disconnect Lug 5 Non-Insulated Rectangular Ring Terminal 5 Nylon Insulated Wire Joint 5 Standard Version, Short Sleeve, Insulated 5 Tubular 5 Type PA 5 Bi-Metal 4 Classic 4 Flat, Insulated 4 Fully Insulated, 90° Flag 4 Insulated, Locking, Short Sleeve 4 Locking 4 Non-Insulated Male Disconnect 4 Non-Winged 4 Non-covered Ferrules 4 Push-In 4 Standard, Old DIN 4 Tubular Ring Compression Lug 4 Twist, Wing 4 Flanged, Insulated 3 Heavy Duty 3 Loose-Piece 3 Luminaire Disconnect 3 Model 62® Connector 3 Non-Insulated, Large, Tubular 3 Non-Insulated, Locking 3 Nylon Insulated Female Disconnect 3 Nylon Insulated Flanged Fork Terminal 3 Short Sleeve, Insulated 3 Short Sleeve, Locking 3 Two Load 3 Vinyl Insulated Butt Splice 3 1-Pilot, Lever-Action 2 90° 2 90°, Flag, Non-Insulated 2 Bell End 2 Butt Splice 2 Compression 2 Covered Single Wire Ferrule 2 Flame Retardant, Contoured Winged 2 Heat Shrink 2 Heat Shrinkable 2 Heat Shrinkable Butt Splice 2 Heat Shrinkable Insulated Male Disconnect 2 Heat Shrinkable Ring Terminal 2 High Temperature, Twist 2 Insulation Displacement 2 Locking, Long Sleeve 2 Model 60® Wire Connector 2 Model 61® Connector 2 Model 63® Connector 2 Non-Insulated Butt Splice 2 Non-Insulated, Two Load, Plug 2 Nylon Fully Insulated Female Disconnect 2 Nylon Fully Insulated Male Disconnect 2 Nylon Insulated 2 Nylon Insulated Open Top 90 Degree Flag Female Disconnect 2 Nylon Insulated, Short Sleeve, Parallel 2 One Load, Plug 2 Pin Shape Flange, Short Sleeve, French Label 2 Rectangular, Insulated 2 Round 2 Solid, Insulated 2 Standard Version, Short Sleeve 2 Terminal Kit 2 Vinyl Fully Insulated Double Crimp Female Disconnect 2 1-Branch, Non-Insulated, Short, UL 1 1-Piece, Roll Crimp 1 2-Conductor 1 2-Piece 1 2-Piece, Large, Robertson Set Screw 1 2-Wire Standard Version 1 3-Port 1 ACO:AL OFFSET PIN 1 APC, Singlemode, OS2 1 Aircraft 1 Application Tools 1 Build-Up 1 C-Tap 1 Centre Pin 1 Centre Pin, Style 87 1 Combination 1 Compression Grounding 1 Compression Sleeve 1 Crimping Sleeve 1 Cushion Grip, Waterproof 1 Disconnects 1 Double Crimp 1 Double Crimp, Locking 1 Dual-Rated, Straight 1 E1 Plus Solid State Relay 1 Ergonomic Winged 1 Expanded Entry 1 Female 1 Ferrule Kit 1 Fire-Rated Components and Accessories 1 Flag, Straight 1 Flame Retardant, Swept Wing 1 Flame Retardant, Winged 1 Flame-Retardant 1 Flanged Tongue 1 Flanged, Insulated, Short Sleeve 1 Flat, Brazed Seam, Serrated, Sleeve 1 Flat, Non-Insulated 1 Flat, Sleeve 1 Fully Insulated, 90° 1 Fully Insulated, Flag, Flat 1 Heat Shrink, Flat 1 Heavy Duty, Non-Insulated 1 Heavy-Duty, Non-Insulated 1 High Temperature Wire Connectors 1 High Temperature, Bulk 1 High Temperature, Insulated 1 IEC Enclosure Accessories 1 In-Line 1 Insulated Nylon 1 Insulated, Expanded 1 Insulated, Round 1 Insulated, Short Sleeve, Pin Shape Flange 1 Insulated, Straight 1 Large Tubular 1 Locktite Connectors 1 Long Sleeve, Standard 1 Long Sleeve, Standard Version 1 Loose Piece, Flat 1 Loose Piece, Standard 1 Mini 1 Model 61® Wire Connector 1 Motor Pigtail Connector with Boot 1 Non Insulated, Straight, Tubular 1 Non-Insulated Adapter 1 Non-Insulated Fork Terminal 1 Non-Insulated Locking Fork Terminal 1 Non-Insulated Wristlock Disconnect 1 Non-Insulated, 90° Flag 1 Non-Insulated, Plug 1 Non-Insulated, Short 1 Non-Insulated, Short Sleeve, Parallel 1

Performance Plus™ 3 Twister® Proflex™ 2 Marrette®, Type II® 1 Spec-Kon® 89 Catamount® 83 Blackburn® 35 Reel Smart™ 10 WeatherProof® 8 Wire-Nut® 8 Twister® 7 ILSCO 6 Pos-E-Kon® 6 Wing Nut® 6 Dragon Tooth® 5 Marrette® PRO-Snap 4 Pan-Lug™ 4 Starfix™ 4 Color Keyed 3 Twister® ProFLEX™ 3 UnderGround® 3 Blackburn®, Color-Keyed® 2 Blackburn®, E-Z-Ground® 2 Black®, Marrette® 2 Canadian WireTwist™ 2 Catamount®, Sta-Kon® 2 EPIC® 2 Scotchlok 2 Ampact 1 CADDY 1 ECONOMY FOCAS 1 Economy FOCAS 1 Greenie® 1 In-Sure® 1 Marrette®, Sta-Kon® 1 OptiCam® 1 Performance Plus™, Scotchlok™ 1 SafetySub® 1 Shield-Kon® 1 SpliceLine™ 1 StrongHold™ 1 Trade-Select™ 1

Non Insulated Ring Terminal 54 Compression Pigtail Adapter 19 Pyropak Termination Kit 13 Bi-Metal Pin Connector 9 Lever Wire Connector 5 Pin Connector 5 Male/Female Luminaire Disconnect 4 Quickterm Termination Kit 3 Mini Wire Connector 2 Ring Terminal 87 Female Disconnect 39 Fork Terminal 37 Motor Pigtail Male Disconnect 22 Insulated Ferrule 20 Butt Splice Connector 17 Motor Pigtail Female Disconnect 17 Non-Insulated Fork Terminal 17 Wire Joint 17 Insulated Male Disconnect Terminal 15 Non-Insulated Ferrule 13 Male Disconnect 12 Center Pin Terminal 11 Flag Terminal 11 Non-Insulated Female Disconnect 11 Ferrule 8 Partially Insulated Female Disconnect 8 Expanded Insulated Ring Terminal 7 Pin Adapter Terminal 7 Splice Connector 6 Crimp-On Wire Joint 5 Female Disconnect Terminal 5 Insulated Locking Fork Terminal 5 Non Insulated Fork Terminal 5 Blade Terminal 4 Crimp Connector 4 Fully Insulated Male Tab 4 Insulated Pin Terminal 4 Insulated Twin Ferrule 4 Luminaire Disconnect 4 Non Insulated Female Flag Disconnect Terminal 4 Off-Set Compression Pigtail Adapter 4 Push-In Wire Connector 4 Solid Offset Pin Adapter with Insulating Boot 4 Wire End Ferrule with Insulating Collar 4 Compression Cable Joint Connector 3 Female Bullet Disconnect 3 Female Contact 3 Fully Insulated Female Disconnect 3 Heat Shrink Butt Splice 3 Pigtail Adapter 3 Wristlock Disconnect 3 Disconnect 2 Disconnect Lug 2 Disconnects Terminal 2 Ferrule Assortment Kit 2 Heat Shrink Butt Splice Connector 2 Insulated Female Disconnect 2 Insulated Fork Terminal with Flanged Tongue 2 Insulated Male Tab 2 Jumper Assembly 2 Male Bullet Disconnect 2 Male Contact 2 Non-Insulated Flag Terminal 2 Non-Insulated Male Tab 2 Partially Insulated Male Bullet Disconnect 2 Piggy Back Disconnect 2 Terminal Kit 2 Adapter 1 Angle Plug 1 C-Crimp Connector 1 C-Tap Round Crimp Connector 1 Coaxial Grounding Connector 1 Compression Pin Adapter 1 Compression Pin Adapter with Insulating Boot 1 Connector 1 Connector Assembly 1 Contact Connector 1 Crimp Insulated Ring Terminal 1 Expanded Insulated Fork Terminal 1 Female Crimp Terminal Contact 1 Female Disconnect Tab 1 Female Disconnect with Mylar Tape 1 Female Tab 1 Fully Insulated Female Disconnect Terminal 1 Fully Insulated Male Disconnect 1 H-Frame Splice Closure 1 Hand Tool 1 High Temperature Wire Connector 1 Installation Kit with Tool 1 Insulated Butt Splice 1 Insulated Butt Splice Kit 1 Insulated Coupler 1 Male Tab 1 Motor Lead Pigtail Male Disconnect 1 Motor Pigtail Disconnect 1 Non-Insulated Butt Splice Connector 1 Non-Insulated Female Quick Disconnect Adapter 1 Non-Insulated Tubular Ring Termial 1 Non-Insulated Tubular Ring Terminal 1 Offset Pigtail Adaptor with Insulating Cover 1 Partially Insulated Butt Splice Connector 1 Patch Cord 1 Pigtail 1 Pigtail Compression Sleeve 1 Pigtail Connector 1 Pigtail Male Disconnect 1 Pin Adapter Terminal with Outer Thread 1 Pin Connector with Shrink Insulator 1 Pin Terminal Adapter 1 Single Wire Ferrule 1 Solid Center Pin Adapter with Insulating Boot 1 Termination Kit 1 Tube Kit 1 Twist-On Combination Wire Connector 1 Underground Splice Kit 1

Aluminum/Copper 6 Vinyl 6 Copper, Nylon 4 Steel 4 Tin-Plated Copper 4 Brass/Copper 3 Copper Alloy 3 Copper Alloy, Glass-Filled Thermoplastic 2 Copper, Nylon Insulation 2 High Conductivity Copper Alloy 2 Nickel Alloy, Copper 2 Nylon Insulation 2 Phenolic 2 Rubber, Manganese Bronze 2 Tin Plated Steel 2 Brass, Metal Insulation Sleeve 1 Brass,Copper 1 Copper, Fluoropolymer 1 Copper, PA Insulation 1 Copper, Polyamide 1 Copper,Copper 1 Copper/Polyolefin 1 Galvanized Steel 1 Gold-Plated Copper Alloy/Thermoplastic 1 Metal/Copper 1 Nylon/Steel 1 PVC, Brass 1 Plastic 1 Polyamide 1 Polypropylene 1 Polypropylene and Thermoplastic Elastomer, Steel Spring 1 Rubber 1 Steel, Copper Sleeves 1 Thermoplastic, Steel Strap 1 Zinc Plated Steel, Copper 1

8 AWG 43 16 - 14 AWG 17 1 AWG 14 250 kcmil 14 4/0 AWG 14 3/0 AWG 13 22-14 AWG 7 24-12 AWG 7 750 kcmil 7 18-10 AWG 5 18-12 AWG 5 12-18 AWG Solid, 12-14 AWG (19 Strand or Less) Stranded, 12-14 AWG (19 Strand or Less), #16 AWG (26 Strand or Less), #18 AWG (16 Strand or Less) Stranded Tin-Bonded 3 14-6 AWG 2 22-8 AWG Copper 2 22/2-12/4 AWG 2 6 AWG Aluminum, 8 AWG Copper 2 12 - 10 AWG 33 4 AWG 29 2 AWG 28 1/0 AWG 18 22 - 16 AWG 16 18 - 14 AWG 15 22 - 18 AWG 13 2/0 AWG 11 0.5 - 1.5 mm² 8 4-3 AWG 8 1.3 mm² 7 1.5 - 2.5 mm² 7 10-12 AWG 7 14 AWG 7 2-1 AWG 7 26-22 AWG 6 300 kcmil 6 0.32 mm² 5 18 AWG 5 400 kcmil 5 6-5 AWG 5 1/0AN-2/0 AWG 4 10 AWG 4 13.3 mm² 4 17 AWG 4 18-22 AWG 4 1AN-1/0 AWG 4 28-12 AWG 4 6 AN 4 0.5 mm² 3 16 AWG 3 18-17 AWG 3 2/0AN-3/0 AWG 3 22 AWG 3 22-12 AWG 3 3/0AN-4/0 AWG 3 4-6 mm² 3 600 kcmil 3 8 AN 3 1/0 AN 2 12 AWG 2 12-10 AWG Aluminum, 18-10 AWG Copper 2 14-10 AWG 2 14-12 AWG 2 18-4 AWG 2 18-8 AWG 2 18/2-16/2 AWG 2 18/4-12/2 AWG 2 21.15 mm² 2 25 mm² 2 26 AWG 2 33.6 mm² 2 35 mm² 2 4/0 AN 2 4/0 AWG - 250 kcmil 2 4/0AN-250 MCM 2 9-7 AWG 2 #2 AWG 1 #4 ASCR AWG, #4 STR to #2 SOL AWG 1 #6 - #4 AWG 1 (2) 18 AWG Minimum, (3) 10 AWG Maximum 1 (2) 18-4 AWG 1 (2) 22-20 AWG 1 (2)14-(3)12 AWG 1 (2)18-(3)12 AWG 1 (2)18-(4)10 AWG Solid/Stranded 1 (3) 18-12 AWG 1 (3)14-(4)12 AWG 1 (3)16-14 AWG 1 0 - 21.14 mm² 1 0 - 375 mm² 1 0 - 42.409 mm² 1 0-14 AWG 1 0-8 AWG 1 0.32 - 0.32 mm² 1 0.33 mm² 1 0.5-1.5 mm² 1 1 AN 1 1 AWG Aluminum, 3 AWG Copper 1 1/0 ASCR AWG, 1/0 Stranded AWG 1 1/0 AWG Aluminum, 2 AWG Copper 1 1/0-2/0 AWG 1 10 - 8 AWG 1 10-14 AWG Solid, 10-12 AWG Stranded 1 1000 kcmil 1 12 - 3 AWG Minimum, 6 - 2 AWG Maximum 1 12 AWG Aluminum and 18-10 AWG Copper 1 12-10 AWG, 3.3 - 3.3 mm² 1 12-10 AWG, 3.3 mm² 1 12-4 AWG 1 14-12 AWG Aluminum/Copper 1 14-2 AWG Minimum, 10-3 AWG Maximum 1 14/3-12/4 AWG 1 16-12 AWG, 1.3 - 6.2 mm Combined Wire, 1.29 - 2.05 mm Round, 1.27 - 2.03 mm Rectangular 1 16-14 AWG Copper 1 177.34 mm² 1 18 - 16 AWG 1 18 - 17 AWG 1 18-10 AWG Aluminum/Copper 1 18-14 AWG Stranded 1 18-14 AWG, 0.82 mm² 1 2 -6 mm² 1 2 AN 1 2 AWG ASCR, 2-1 AWG Stranded 1 2 AWG Aluminum, 4 AWG Copper 1 2-1/0 AWG 1 2-14 AWG Minimum, 3-12 AWG Maximum 1 2-3 AWG 1 2/0 AWG Aluminum, 1 AWG Copper 1 2/2 AN-2 AWG 1 20 AWG 1 20-10 AWG, 18-8 AWG 1 20-12 AWG Solid, 16-12 AWG Stranded, 18-14 AWG Stranded Tin-Bonded 1 20-12 AWG Solid, 16-14 AWG (19 Strand or Less), 18 AWG (7 Strand or Less) Stranded, 14-12 AWG (19 Strand or Less), 16 AWG (26 Strand or Less), 318 AWG (16 Strand or Less) Stranded Tin-Bonded 1 20-14 AWG 1 20-18 AWG 1 20-22 AWG 1 22 - 14 AWG 1 22 - 20 AWG 1 22-10 AWG Solid and Stranded Copper, 12-10 AWG Solid Copper Clad 1 24 AWG 1 24-12 AWG Solid/Stranded 1 3.3 mm² 1 3/0 AWG Aluminum, 1/0 AWG Copper 1 300 kcmil - 4/0 AWG 1 336.4 - 1192.5 kcmil 1 350 MCM 1 4 - 3 AWG 1 4 - 6 mm² 1 4 AN 1 4 AWG Aluminum, 6 AWG Copper 1 4-3 AWG, 22-16 AWG 1 4/0 AWG Aluminum, 2/0 AWG Copper 1 4/0 AWG Tap, 350 kcmil Main 1 53.47 mm² 1 550/24 AWG 1 6 mm² 1 6/6AN 1 600 - 400 kcmil 1 6AN 1 700 - 750 kcmil 1 750 kcmil - 2 AWG 1 775/24 AWG 1 8 AWG Aluminum, 10 AWG Copper 1 8-1 AWG 1 8.36 mm² 1 8AN 1 9, 8, 7 AWG 1

500 V 4 600/1000 V 4 600V 4 35000 V 3 750 V 3 1000 VAC/VDC 2 300 kV 2 35,000 V 2 1000 V 1 125/250 V 1 4000 V 1 5 kV 1 600 1 600 V, 1000 V Fixture and Sign 1 Nylon Fully Insulated Male Disconnect 1 Up to 600 V 1

No Finish Applies 2 Nickel Plated 1 Smooth 1

Pink 7 Purple 7 Orange 5 NA 4 Light Gray 2 Silver,White 2 Tan 2 Black,Orange,White 1 Blue/Orange 1 Brown/Blue 1 Colorless 1 Light Blue 1 Metallic/Copper Plated 1 Olive, Orange, Royal Blue and Yellow 1 Red/Yellow 1 White/Blue 1

M5 3 #12 2 7/16 in 2 #2 1 0.164 in 1 0.63 in 1 1/4 1 3 in 1 42491.00 IN 1 42950.00 IN 1 5/16 1 M10 1 M3 1 M6 1

Aluminum Sleeve 1 Copper 1 ETFE 1 Fluoropolymer/ETFE 1

Seamless Tubular 4 Short 4 Brazed Seam, Chamfered 3 Brazed Seam, Internal Serration 3 Brazed/Internal Serration 3 Grip Sleeve 3 Long 3 Funnel, Brazed Seam 2 Serrated, Brazed Seam 1 Tubular 1

0.25 x 0.032 in 1 1/4 in W 1 1/4 in x 0.032 in 1 1/4 x 0.303 in 1 2.8 x 0.5 mm 1

0.19 in 1 0.23 in 1 0.3 in 1 0.31 in 1 0.56 in 1 0.59 in 1 0.61 in 1 0.62 in 1 0.81 in 1 0.9 in 1 11 in 1 11-1/4 in 1 12-1/2 in 1 13.18 in 1 3.2 in 1 7.4 mm 1 7.6 mm 1 8.8 mm 1

0.72 in 2 1-1/2 in 2 1.18 in 2 1.26 in 2 0.196 in 1 0.276 in 1 0.34 in 1 0.416 in 1 0.492 in 1 0.53 in 1 0.669 in 1 0.728 in 1 0.79 in 1 0.91 in 1 0.93 in 1 0.965 1 0.984 1 1.024 in 1 1.142 in 1 1.181 in 1 1.22 in 1 1.378 in 1 1.417 in 1 1.535 in 1 1.614 in 1 1.85 in 1 10.23 in 1 2 in 1 2.63 in 1 2.89 in L 1 3 m 1 3-1/4 in 1 3.9625 in 1 4-3/4 in 1 6-3/4 in 1

0.204 x 2.5 in 1 0.252 in dia 1 0.433 in 1 0.433 in dia 1 0.492 in dia 1 0.551 in 1 0.552 in 1 0.708 in 1 1.10 in dia 1 1.46 in dia 1 1.5 mm dia x 8 mm L 1 1.7 in dia 1 2 mm dia x 8 mm L 1 3.6 mm dia 1 4.8 mm dia 1