Pulling grips are reusable tools for pulling bare conductors, insulated wires, synthetic rope, wire rope and fiber optic cable. These grips do not damage the cable, as the tension remains uniform throughout the length of the grip. The mesh responds to fit either a single cable or a bundle of cables. Pulling grips may be used for pulling cable on overhead or underground applications, for stringing service or communication lines into factories, for pulling wire through conduit and for underground electrical pulls. Pulling grips are woven in galvanized steel for greater strength and longer life. Also offers pulling kits that come in a vinyl mat with pockets that can be rolled and tied. Multi-weave pulling grips are constructed of high strength galvanized steel strands and are designed for pulling aluminium or copper bare conductor, wire rope and insulated cables. These grips are used in applications such as distribution line stringing and overhead transmission. Multi-weave pulling grips are available with a flexible or rotating eye which can be attached to a swivel. The forged steel flexible eye will thread through sheaves and blocks without binding, but is not a swivel and will not turn under tension. The rotating eye can turn to relieve pulling torque when tension is relaxed.